Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Customize your EAGLE software with community-created programs.
Highlights parts with a given value (board or schematic). Modified Version of Rene König ULP. Works for Eagle 7. Not tested for Eagle 6. Hebt Parts mit einem gegebenen Value hervor (Board oder Schematic). Modifizierte Version von Rene Königs ULP. Funktioniert mit Eagle 7. Nicht getestet mit Eagle 6.
Shows a detailed report of differences between schematic and libraries. It also reports if libraries or devices are missing.
A small modification of find-single-ended-wire.ulp. If you have a board containing a number of vias connecting polygons on different layers find-single-ended-wire would flag these, which can be irritating if you have a large number of them. find-sew skips these, unless you start it with the \'via\' parameter.
alignD.ulp is a rework of align.ulp with a dialog box for easy text entry and option comparisons. Sadly, like the original, it only works on parts in boards.
Set of files to analyze a board and generate Gerber files and EXCELLON drill file. It will also prepare a ZIP of these suitable for delivery to a board fabrication house. Please see enclosed README. This zip file includes the correct drillcfg2.ulp, whereas the first upload did not.
Pretty much editnext-sheet/editprev-sheet, but for board layouts. Scrolls through visible copper layers based on what is used. Will work with any amount of copper layers (up to 16 of course) with no extra configuration. Top, bottom, and all also display respective place, name, docu layers as well. The ULP should be pretty easy to edit to change this behavior.
Anpassung von align2 an die neue Auflösung von Eagle 6.x. Benutzt jetzt mic2u, mm2u, usw.
Updatemanager für ein \"echtes\" Update auf Eagle 4.1x mit korrekten Packages und Umwandlung von Devices in Device-Sets. (Update v1.4)\r\nUploaded by Walter Mücke
Markierung von Netzenden mit I,O und IO - Verweis auf gleiche Netz- und Busnamen durch Angabe der Schaltplanseite. V1.5 mit neuen Features und Bug-Bereinigung.\r\nUploaded by Andreas Funcke