Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Customize your EAGLE software with community-created programs.
Show a simple list of drill sizes and counts, plus how many are used for vias. Use as a \\\"sanity check\\\" for odd drill sizes.\r\nUploaded by Alan Stummer from University of Toronto
This EAGLE User Language Program produces a EXCELLON output file which uses only one Tool (T01)independent of the drill diameter (No drill rack is necessary)It\"s used for drilling milled boards to reduce the amount of tool changes.\r\nUploaded by G.Datler from @home
Exports a netlist from Eagle to Allegro. v1.0 2009/07/27 This ULP exports parts and nets from Eagle schematic into a Telesis netlist that can be imported from Cadence Allegro (File/Import/Logic/Other), and create associated device files for all parts (including swap info). Tested with OrCAD v16.2 \r\nUploaded by Eric HEURTEL from Sound4
Abgeänderte Version von pcb_gcode.ulp für den ColinBus Profiler.Zum Erzeugen von Isolationsfräsen und bohren von Leiterplatten.\r\nUploaded by Gerd Vogel from zu Hause
Creates a qfp SMD mount package/symbol/device using dimensions from datasheet, pin names (and types). Numbers can be taken directly from the datasheet without having to calculate pin sizes.\r\nUploaded by James Davis
EAGLE-TO-3D…Version 4.0 has been upgraded to allow the user to Enable/Disable 3D Mapping Assumptions. When 3D Mapping Assumptions are enabled, a larger percentage of detailed 3D models will appear on the generated 3D Board. When entering the IDF-TO-3D tool, the user can accept, reject, or replace these 3D mapping assumptions. After acceptance or replacement of mappings, IDF-TO-3D will remember the mappings for future 3D boards. When mapping assumptions are disabled, EAGLE-TO-3D Version 4.0 will work like previous revisions and only map components from the EAGLE Supplied Libraries. Version 4.0 also allows the user to modify the board thickness. A single button click creates your 3D PCB directly from EAGLE. Thousands of EAGLE Library Components are mapped to 3D models. The ULP also includes free use of the IDF-to-3D tool that allows users to connect additional unmapped footprints to 3D models. Generate a free 3D PDF file, purchase a 3D STEP file, or purchase a 3D Printer Prototype. Receive a free 3D Printer Prototype with your PCB-POOL® order.
Auto place sheet: aps.ulp. Place components on PCB as they are arranged on the schematic sheet. Enter sheet number,scale & x,y base point for the sheet, in dialogue. the last settings are stored in .ini file to aid interactive placement. Based on autoplace-3.ulp \r\nUploaded by Jim Meech from Home User
This is the brd_to_dsn file for EAGLE V6. The modifications relate to the change of the unit step in V6 from 1/10000 mm to 1/320000 mm. \r\nUploaded by Robert Boers from Stromasys SA
This ULP can be used to automate filling out a frames docfield.Dieses ULP kann verwendet werden, um das Docfield eines Rahmens automatisiert auszufüllen.\r\nUploaded by René König
This ULP imports, scales, mirrors and rotates polylines and splines from a DXF file. Use this ULP to import a vectorized logo, your favorite font etc. Arcs, circles, splines, curves are not supported yet. Since this is a very simple, rudimentary script it just generates straight lines to connect vertexes. Use a vector graphics editor to prepare,edit/refine the DXF file before importing it.\r\nUploaded by Tim Ruetz from caiaq