Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Customize your EAGLE software with community-created programs.
This ULP program will put all the necessary dimensions for holes (layer 45) and board outline (arcs and wires on layer 20) on your board -> in mm. \r\nUploaded by Klein from www.braintechnology.de
Draws a nice drill plan legend with a hole, size, tolerance, and number of holes for each size of hole on the board. The spread sheet looking chart is drawn to the right of the board in the .brd file. The total number of holes is also shown. This ULP creates a script named DRAWPLAN.SCR located in your design directory. Credit for the original .ulp goes to Cadsoft. I modified this to fit the standard we use in the USA.\r\nUploaded by Frank Hoffman from LLOYD I/O INC.
CHKPIN01.ULP checks the placement of gates/pins (default Grid) in the schematic testet die Plazierung (default Grid) der Gates/Pins im Schaltplan SNAPSCH.ULP snap the symbols of the current shematic to default grid (0.1 Inch) generiert ein Script um die Symbole im aktuellen Schaltplan auf das Default-Grid zu setzen\r\nUploaded by A. Zaffran from CadSoft
Scales up or down a part or a symbol in a library. More on \r\nUploaded by Hansjörg Sämann
This ULP program generated CAD data for optical inspection system VISCOM\r\nUploaded by Milan Trubelik from AEV spo. s r.o.
Generates output in UNIDAT format which is used by UNICAM software. This software provides data for automatic mounting and test equipment.\r\nUploaded by Rudi Hofer from CadSoft
Fräsen von LPs basierend auf mil3.ulp mit folgenden Erweiterungen:- Draehtenden entsprechend Eagle- Mehr Pad und Via-Formen- Unterdruecken von kurzen Drahtstuecken damit der Fräserkopf nicht unnoetig auf/abgesenkt wird.\r\nUploaded by Werner Schattmann from Schattmann
Bauteileliste nach Baut.typen sortiert\r\nUploaded by Ivor Krause from Institut für Nachrichtentechnik
Corrected version of mill.ulp: Generates milling shapes which can be edited and output with the CAM Processor. Erzeugt Fraeskonturen, die man editieren und mit dem CAM-Prozessor ausgeben kann.\r\nUploaded by Rudi Hofer from CadSoft
Version 1.10, rotiert nun auch RECTANGLES, SMDs, TEXTE und PINS.Mehr auf http://home.t-online.de/home/Hj.Saemann-BL\r\nUploaded by Hansjörg Sämann