<User>Language Programs</User>

User Language Programs(ULP)

Customize your EAGLE software with community-created programs.

psscale2.zip by admin

Revised and improved version of PSSCALE.ULP. See PSSCALE.TXT included in zip file\r\nUploaded by christopher buckley from Vancouver, B.C., Canada

10366 Downloads | 397 Likes | 12.23.2001

generate_3d_data_eng.pdf by admin

This is the help file of Generate 3D Data translated to English. Please e-mail me about any errors you find. There is no gurantee of accuracy or warranty either expressed or implied. \r\nUploaded by Chip from UVM

10384 Downloads | 414 Likes | 03.11.2007

generate_3d_data.zip by admin

Exportiert 3D-Daten der Leiterplatte mit Bauteilen zur Weiterverarbeitung in einem MCAD-System (Ideas, SolidWorks, ...), ausgegebenes Dateiformat : IDF3.0 (IDB:board, IDL:libary)\r\nUploaded by Neubacher Andreas from Commend International GmbH

10513 Downloads | 433 Likes | 10.06.2006

bom2.ulp by admin

produces a part list with extension .BO9 suitable for PARTS AND VENDORS part-list manager program.\r\nUploaded by NIKOS CHALIKIAS from anco

10540 Downloads | 548 Likes | 01.11.1998

unrouted.ulp by admin

UNROUTED.ULP determines tiny (and therefore maybe invisible) unrouted signals.\r\nUploaded by Daemon Reinhard from University of Technology GRAZ/Austria

10652 Downloads | 577 Likes | 02.27.1997

gcode.zip by admin

Updated gcode creation files, allowing selections of more parameters at runtime. These are modified from others files to produce gcode, tested using turbocnc.\r\nUploaded by Al Schemmer WB0YRQ from Hawarden Iowa USA

10686 Downloads | 408 Likes | 10.07.2003

genpkg_qfp.ulp by admin

Generates packages for SMT quad flat pack ICs including QFP, SQFP, TQFP, TSQFP and others.\r\nUploaded by Weartronics from http://www.weartronics.com/

10887 Downloads | 414 Likes | 02.14.2006

statistic-copper-plane.zip by admin

Statisic of copper (Board plane)\r\nUploaded by A. Zaffran from CadSoft

10967 Downloads | 368 Likes | 06.25.2004

importbom_and_netlist.zip by admin

These are a couple of scripts I wrote to facilitate the importing of Orcad schematics into the layout editor. ImportNetlist.ulp imports a PADS2K netlist. ImportBOM (the most useful of both) imports a regular Orcad BOM file and lets you select the package for each group of items. The scripts are not well commented, maybe soon I\"ll work on that.\r\nUploaded by Jean Simonet from - NONE -

11612 Downloads | 393 Likes | 11.24.2003

netlist_protel.ulp by admin

Generates a netlist in Protel Standard format (similar to Tango)\r\nUploaded by Hans Lederer from Ingenieurbuero Lederer

11735 Downloads | 461 Likes | 09.19.2001