Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Customize your EAGLE software with community-created programs.
Shows the partlist with all part info that can be used on schematics or board. On double-clic, the part is highlighted. If the schematics has several sheets, it will jump to the sheet of the selected part. Partlists can be saved from sch or brd.
shows a list of the signals with the name, number of associated wires, airwires, vias, mean position and length sum.
shows a list of the airwires with position, signal and length.
shows a list of the via types and the vias with position, type, drill and signal.
Modified DXFImport v1.3 to permit applying a scale factor to the DXF data (and optionally the linewidth and origins).
This ULP assumes the components to be arrayed are in the board or schematic prior to the ULP being run. Can handle both rectangular arrays and circular arrays.
Set of files to analyze a board and generate Gerber files and EXCELLON drill file. It will also prepare a ZIP of these suitable for delivery to a board fabrication house. Please see enclosed README. This zip file includes the correct drillcfg2.ulp, whereas the first upload did not.
Distribute 1.0 - distribute grouped parts on board layout. After using arrange.ulp, parts will be arranged in piles on the layout. Select a pile and run this script to separate the parts to make it easier to manipulate each one. Can be used on any selected group of parts.
Arrange 1.0 - arrange parts on board grouped by schematic page. Used with a multi-page schematic, this script will arrange the parts on the board into separate piles, one pile per schematic sheet. Use distribute.ulp to separate each pile.
Interface for PCBSim, a simulation tool for signal integrity analysis developed by Felicitas Customized Engineering GmbH.