Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Customize your EAGLE software with community-created programs.
Creates a line of holes or vias along an arbitrary path. Options for a trace with specified width/exposure which follows the line of vias. The vias can be spaced by total number for the guide path, or by distance between vias.\r\nUploaded by James Connors from USA
Bill of Materials program V2.1. Uses external parts Database and creates external link list to match Database entries to schematic parts to generate combined list. Problems corrected with dollar signs in cost, total computation, blank fields in database. Uploaded by Jim Thurman from NeuroCom Intl\r\nUploaded by Jim Thurman from NeuroCom Intl
Ever needed to limit your board\"s drills to a standard drill rack to avoid costs? Eagle does not allow you to change pad drill sizes outside the library - neither does this ULP. BUT at least it lists which part from which library causes the non-standard drill to be listed by drillcfg.ulp. It also counts drills in total and per size. Based on CadSoft\"s drillcfg.ulp. Revision 2 with bugfix.\r\nUploaded by Philipp Adelt from http://philipp.adelt.net
This script loops through all Symbols and Packages in a library and changes Font of any text it finds to Vector. All the text in Eagle libraries are made in the Proportional font, which frequently causes problems while using CAM Processor - CAM Processor automatically converts all the text to Vector font, which frequently causes parts\" Names and Values to shift slightly and overlap with something around at the output. By converting all the text in libraries to Vector font, these problems are eliminated at its source. This program is based on \\\"change-text-in-lbr.ulp\\\" by rtzaudio@mindspring.com \r\nUploaded by Pavel Hanak from Brno University of Technology
Generate long spirals for print inductor. \r\nUploaded by A. Zaffran from CadSoft
Renumber the parts of a schematic, optionally specifying start number, skipping digits and/or only those parts within a user specified rectangular area. The original did not work with user areas and multiple sheets. This one does. Comments welcome.\r\nUploaded by Neil Allison from Avon Technical Solutions
Copy unique elements from one library into another.\r\nUploaded by Jim Thurman from NeuroCom
This ULP converts a schematic or a board into input for GNU PIC. PIC is a picture description language used by Troff and LaTeX for very high quality typesetting of documents, reports, manuals, datasheets, etc. Adapted from the dxf writer ulp.\r\nUploaded by D. Jeff Dionne from uClinux project
Iterates through all traces widths on a board and changes traces of a particular width to a new width. The compare is based on the existing width rather than signal names.\r\nUploaded by Bob Starr from RTZ Audio
Draw a Microstrip Radial Stub\r\nUploaded by A. Zaffran from CadSoft