Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Customize your EAGLE software with community-created programs.
Updatemanager für ein echtes Update auf Eagle 4.14 und höher mit korrekten Packages und Umwandlung von Devices in Device-Sets.Mit: REPLACE im Schaltplan! (Update v2.23)Update manager for a \"real\" update on Eagle 4.14 and higher with correct packages and converting of devicess in devices sets.With REPLACE in the schematic! (update v2.23)\r\nUploaded by Walter Mücke
ULP zur Ausgabe der Eagle-Daten in einem Format, welches direkt von einem Polar GRS500 Flying Probe Testsystem eingelesen werden kann. \r\nUploaded by Hermann Reischer from Polar Instruments
Draw a circle with the number of pins specified on the command line, eg: RUN drawpoly.ulp \r\nUploaded by Bill Eichin from backwoods technologies llc
This ULP generates new layers for solder stop mask and cream frame. This allows to edit/delete certain symbols. Mit diesem ULP kann man eigene Layer fuer die Loetstoppmaske bzw. Lotpastenmaske erzeugen. Diese Symbole koennen einzeln editiert werden.\r\nUploaded by Richard Hammerl from CadSoft Computer GmbH
This ULP and associated symbols implement an inter-sheet reference scheme. Running the ULP on a schematic with the intersheet reference (ISR) symbols makes it easy to find where the signal goes on other sheets. This version includes support for using the ISRs on busses as well as nets. This version corrects file path problems.\r\nUploaded by Kevin Callan
This little ULP is a modified \\\"MakeLBR.ULP\\\", with instructions included in the .ulp file itself. The improvement is that all library-pac, library-sym, library-dev are checked for library name plus package, symbol, and device name duplication and ignored if they have been edited already. I don\"t know if this will work for all scenarios, however, I used it on a large circuit board schematic with about 550 components, and it generated the libraries for all parts.\r\nUploaded by Frank Hoffman from LLOYD I/O INC.
mill_me updated to eagle 4. Produces a script to mill holes of different diameters with only one milling tool. Refer to the description in the file header.\r\nUploaded by Stefan Auchter from scotty engineering
This ULP converts pad shape, pad diameter, drill size for an opened Library. I prefer to use SQUARE pad for Pin 1 and ROUND for remaining. I also have a preferred diameter and drill. This ULP is easily modified to match user needs.\r\nUploaded by Mike Davis from Renton
Works like ShowLBR, but put all packages of a library on a board.\r\nUploaded by Thomas Mohaupt from BTU Cottbus
Scales up or down a part or a symbol in a library. More on \r\nUploaded by Hansjörg Sämann