Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Learn how to use EAGLE from a variety of example projects.
A small 20W Bridged Channel audio amplifier using TDA2005 IC. Including volume control. 12V PSU is Ideal. Heatsink required for IC. By defualt, the design only displays the bare circuit in \"board view\", so just enable the necessary layers for component values and pinouts.\r\nUploaded by Bradlin Basson from South Africa
small signal and small noise amplifier. for magnetic coil pick-up.\r\nUploaded by bogdan rusu from romania
ODB2 adapter on PIC18F2455\r\nUploaded by Alex Sidorenko from www.obddiag.net
20 bit 96 kHz Stereo Digital Equalizer with Microphone Preamp\r\nUploaded by Pet
AVR 8515 Eval-Board GPL2\r\nUploaded by Alexander Wagner
Atmel AVR ISP programmer. Parallel 25-pin port. The schematic can be found here: http://www.lancos.com/prog.html#avrisp\r\nUploaded by Pascalau Gavriil
Two logical probes with pulse detection, which were published at http://www.uoguelph.ca/~antoon/ \r\nUploaded by Daniel Jos
Schaltung um Conrad DCF77 Modul am PC zu betreiben, mit Kontroll-LED (Spannung & Signal)\r\nUploaded by Levent Sarikaya