Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Customize your EAGLE software with community-created programs.
Export library packages to PCB footprints. PCB is an interactive printed circuit board editor for the X11 window system.\r\nUploaded by Ruslan V. Uss
The ULP *FastGcode* is a optimized and flexible G-code generator - toolpaths generated are 3 to 10 faster than similar programs. In the zip you will find two versions that are optimized for Eagle 4.16 and 5.4 ( the only differences are the control positions in the dialog. Happy milling to all ! Livio \r\nUploaded by Livio Cicala
FastPlacer erleichtert das Platzieren der Bauteile, indem es erlaubt, bestimmte Netzklassen (z.B. GND und supplies) in den Airwires auszublenden.\r\nUploaded by Luc Eberhard from EOL Eberhard
Replaces a character in pin names for all symbol pins in a library to a new character (e.g. RESET\\\\ to RESET#). \r\nUploaded by Bob Starr from RTZ Audio
This ULP calculates the resistance and current capacity of all traces on a board. The result is a text overlay that makes a good visual aid.\r\nUploaded by Chris Holmes from NASA Glenn Research Center
Specify the classes to autoroute. Useful for autorouting multilayer SMT boards where the supply classes are routed first, then the analog classes, then the rest.\r\nUploaded by Ed Anuff
This ULP moves the net/bus names so that they do not rest directly on the wire. This helps to better discern an E from an F, for example. This version corrects pathname problem, the error where Eagle sometimes chooses the wire first rather than the text, and now works on busses as well as nets.\r\nUploaded by Kevin Callan
ULP for generating a SPICE netlist for WINSPICE Spice-Engine. Supports Operating Point, DC Sweep, AC, Transient and Transfer Function Analyse with Parameter and Temperature Sweep.\r\nUploaded by Rudolf Thalbauer from Frauscher Sensortechnik
Place a drill legend on Layer 144 Only for Eagle Version 4.11 or higher. Version check fixed\r\nUploaded by A. Zaffran from CadSoft
Erstellt ein CNC drill file\r\nUploaded by Norman Urs Baier from Teseq AG