Customize your EAGLE software with community-created programs.
Check if the parts in the schematic are the same as in the corresponding libraries. Uses the Eagle\'s XML file format as data source. \r\nUploaded by Andrzej Telszewski from -
This ULP lets you replace all instances of a supply symbol in a schematic with a supply symbol from a different supply library.
shows a list of the airwires with position, signal and length.
Have you ever spun a board and found that unused sections of nets are left dangling? Nets that go nowhere? Unintended stubs? Most are harmlessly hidden under vias but some are left to wander uselessly around the board. This ULP DanglingNets will track down and show those leftovers.
Render text on a pcb in a Hershey typeface. Group the text to render then this ULP lets you choose the Hershey font file, the wire (stroke) width, slope, character width factor and output layer. The text is rendered using wires either directly on the pcb or in a library package that is automatically added to the board. A range of Hershey font data files including a customised font for Eagle are provided.
Turn off all the airwires except the signal of interest from a context menu item. Show all airwires again by running the context item again using another wire type. The ULP will create the context menu required.
Show airwires and parts selected by group command in schematic, ease partitial place and route of functional blocks.
Shows all parts in the board editor belonging to a specific sheet in the schematic. Functional circuit blocks can be organized in sheets which systematically group parts on the schematic level. \"show-from-sheet \" thus provides functional block highlighting on the board level. \"show-from-sheet group\" extends this functionality based on select.ulp to group all parts originating from a specified sheet.