Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Customize your EAGLE software with community-created programs.
copy-outline-to-milling.ulp Copies all WIREs and ARCs on layer 20 (Dimensions) to layer 46 (Milling), including those that are embedded in packages. This allows you to edit the contour milling layer that you export to Gerber, to add or remove segments, to optimize it, or to modify segments that are originally in a package, and thus not modifiable directly. Export layer 46 (Milling) in the CAM processor as you contour routing outline (board cutout). \r\nUploaded by Tennessee Carmel-Veilleux from Entreprises TenTech
This ulp panalizes a board, allowing you to enter the number of boards, array size, and duplicating signal names.\r\nUploaded by Todd Beyer
Bill of Materials program V2.1. Uses external parts Database and creates external link list to match Database entries to schematic parts to generate combined list. Problems corrected with dollar signs in cost, total computation, blank fields in database. Uploaded by Jim Thurman from NeuroCom Intl\r\nUploaded by Jim Thurman from NeuroCom Intl
Generate g-code for mechanical processing of board. only one file will be generated, with: mill, clean unused Cu from board, drill all holes, cut larger holes and finnaly cut board contour. Betwin phases, is implemented a simple tool change, for manually change bit. Tested with succes with KCam, but it should work with any other software.\r\nUploaded by Silviu Epure from Dunarea de Jos University of Galati, Romania
Neuere Version (2.0) des Programmes pcb profiler. Mit dem aus Eagle Board Daten für den ColiBus Profiler erstellt werden können.\r\nUploaded by Gerd Vogel from Bavaria
extended version of drillegend.ulp from Christian Bohrer You can extend the symbol list below the line: ARRAY OF EAGLE DRILL SYMBOLS in the source text of this ULP.\r\nUploaded by A. Zaffran from CadSoft
This ULP generates data for mounting machines, incl. passer mark. Please read description in ULP.\r\nUploaded by A. Zaffran from CadSoft
Copies the placement from one group of parts to another in a board. Updated version of copyplacing.ulp with new featurs and some bug correction. - Mirror, spin and all degree angles are fully supported and copied. - Multiple source/destination rectangle are fully supported. - Works with different grid sizes other than mil. - MOVE and ROTATE commands use names instead of coordinates - Improved search engine to reduce the risk of failure or error.\r\nUploaded by Salvatore Previti from http://www.salvatorepreviti.it
Board Statistic, corrected Class handling.\r\nUploaded by A. Zaffran from CadSoft
Creates a line of holes or vias along an arbitrary path. Options for a trace with specified width/exposure which follows the line of vias. The vias can be spaced by total number for the guide path, or by distance between vias.\r\nUploaded by James Connors from USA