Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Customize your EAGLE software with community-created programs.
An updated verson of drills1 that sorts parts by top and bottom placments\r\nUploaded by Alex Brown from Aseptico
Scales up or down a part or a symbol in a library. More on \r\nUploaded by Hansjörg Sämann
Snap Symbol-Pins in Library at default Grid\r\nUploaded by A. Zaffran from CadSoft
Ripup only polygons by signal name in visible layer Ripup nur von Polygonen des Signalnamen in sichtbaren Layern\r\nUploaded by A. Zaffran from CadSoft
Works like ShowLBR, but put all packages of a library on a board.\r\nUploaded by Thomas Mohaupt from BTU Cottbus
This ULP converts pad shape, pad diameter, drill size for an opened Library. I prefer to use SQUARE pad for Pin 1 and ROUND for remaining. I also have a preferred diameter and drill. This ULP is easily modified to match user needs.\r\nUploaded by Mike Davis from Renton
mill_me updated to eagle 4. Produces a script to mill holes of different diameters with only one milling tool. Refer to the description in the file header.\r\nUploaded by Stefan Auchter from scotty engineering
This ULP generates new layers for solder stop mask and cream frame. This allows to edit/delete certain symbols. Mit diesem ULP kann man eigene Layer fuer die Loetstoppmaske bzw. Lotpastenmaske erzeugen. Diese Symbole koennen einzeln editiert werden.\r\nUploaded by Richard Hammerl from CadSoft Computer GmbH
This little ULP is a modified \\\"MakeLBR.ULP\\\", with instructions included in the .ulp file itself. The improvement is that all library-pac, library-sym, library-dev are checked for library name plus package, symbol, and device name duplication and ignored if they have been edited already. I don\"t know if this will work for all scenarios, however, I used it on a large circuit board schematic with about 550 components, and it generated the libraries for all parts.\r\nUploaded by Frank Hoffman from LLOYD I/O INC.
This ULP and associated symbols implement an inter-sheet reference scheme. Running the ULP on a schematic with the intersheet reference (ISR) symbols makes it easy to find where the signal goes on other sheets. This version includes support for using the ISRs on busses as well as nets. This version corrects file path problems.\r\nUploaded by Kevin Callan