Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Customize your EAGLE software with community-created programs.
DrawDesignerInfo.ulp This ULP has a GUI to help you draw the Manufacturing Info (Name, Contact, Layer Name, etc) on all the required layers for Gerber exports. The GUI is easy to use and configurations can be loaded and saved, for reuse between projects. This ULP is production tested with over 50 boards and 4 board houses. All of the manufacturers are satisfied with the normalized presentation of the information at the same place on every layer.\r\nUploaded by Tennessee Carmel-Veilleux from Entreprises TenTech
This ULP can be used to convert a Tango format netlist for input to the Eagle Lite board layout tool. It is a modified version of Ralf Kilgass\" ULP that runs into problems when used with Lite due to the board size limitation.\r\nUploaded by David A. Fishman from Eastern Engineering Labs
ERC-Ergänzung, prüft auf nicht eingefügte Input-Pinssearch for all uninvoked gates with INPUT-Pins\r\nUploaded by Stefan Waldeck from Jünger Audio
Similar to silk.ulp, but updated for EAGLE 4.11 and with enhanced functionality.\r\nUploaded by Robert K NIchols from Self-organized
HVPack V1.0 - A collection of new and modified ULP´s Eine Sammlung neuer und erweiteter ULP´sContains: APRINT, BOM3, DRILLCFG, DRILLS, MAKEJUNC, PART2HTM, REPLACE, ROB, SNAP50, SNAPEW25 and UNROUTED.\r\nUploaded by Helmut Vaupotitsch from ITEC
Dieses ULP dient dazu im Layout-Editor Bauelemente entlang eines Kurvenzuges anzuordnen. Sehr nuetzlich zB fuer aus LEDs bestehenden Quasi-Analog Anzeigen. \r\nUploaded by Johannes Frank
Export a text file of all connector pin locations (uses reference designator prefix) to compare with a mating board to be sure you have the interfacing connectors in the correct location.\r\nUploaded by Kevin Callan
Generates Drill Legends - This version (3.0) adds separate counts for plated holes, and draws table smallest-to-largest to better match drill config files.\r\nUploaded by Brad Goodman from Storigen Systems, Inc.
V2.0 of stkdoc.ulp. It creates now 5 Layers. It is now better suited for creating sandwich prints. V1.0 of zonedoc.ulp. It is for creating zone rulers and a partlist file with zone information. \r\nUploaded by Martin Bammer from TU Vienna
Generates packages for SMT molded body inductors, capacitors and diodes.\r\nUploaded by Weartronics from http://www.weartronics.com/