Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Customize your EAGLE software with community-created programs.
Ever needed to limit your board\"s drills to a standard drill rack to avoid costs? Eagle does not allow you to change pad drill sizes outside the library - neither does this ULP. BUT at least it lists which part from which library causes the non-standard drill to be listed by drillcfg.ulp. It also counts drills in total and per size. Based on CadSoft\"s drillcfg.ulp. Revision 2 with bugfix.\r\nUploaded by Philipp Adelt from http://philipp.adelt.net
Schaltplanseite in .CGM-Datei (Computer Graphics Metafile) ausgeben Für bequemen Import in Textverarbeitungen sowie ideal für PDFs: Texte bleiben durchsuchbar, Output-Datei sehr klein \r\nUploaded by Henrik Haftmann from ViALUX GmbH, Chemnitz
This ULP lists all devices, packages and libraries separately for board and schematic. It includes also the location in Schematic (coordinates and sheet of each gate)and Layout (coordinates and layer). The output file is tabulator separated and can be imported into spreadsheet software.\r\nUploaded by Richard Hammerl from CadSoft
Tested for Eagle 4.11. This ULP exports board or schematic to EPS using dialog. Script is based on epscdraw_411.ulp. EPS file is editable by constants. \r\nUploaded by Filip Kinovic from ECOM s.r.o.
Draw a Microstrip Radial Stub\r\nUploaded by A. Zaffran from CadSoft
This ULP automatically routes all airwires of the given net creating straight connections between pads. Since Eagle does not (yet) snap to pads this can be useful when routing off-grid components.\r\nUploaded by Johannes Frank
Export Eagle board to Protel ASCII format \r\nUploaded by Alex Galakhov
Change device prefixes in a library to a new value.\r\nUploaded by Bob Starr from RTZ Audio
Keybinder: Toggle Silkscreen. When you\"re routing, you can switch the silkscreen on/off. (handy!) You can map F2 to the command: ASSIGN F2 run \"Place_Layer_Cycle.ulp\"\r\nUploaded by Frank Boon from Metatronics
This User Language Program asks the user to fill in their drawing information like paper size and perforation space description etc. and draws a drawing template with info box.\r\nUploaded by Richard Bekking from ROC Flevoland