Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Customize your EAGLE software with community-created programs.
Markierung von Netzenden mit I,O und IO - Verweis auf gleiche Netz- und Busnamen durch Angabe der Schaltplanseite. V1.6 mit Bug-Bereinigung für V4.09r56.\r\nUploaded by Andreas Funcke
The same as drillplan3_0 but the diameters are in Millimeters [mm] Generates Drill Legends - This version (3.0) adds separate counts for plated holes, and draws table smallest-to-largest to better match drill config files.\r\nUploaded by Richard Hammerl
Drillplan and auto-dimension combined. One command \\\"prettys up\\\" your board for documentation, counts holes, counts SMT parts and pads, and automatically dimensions your board. Only available in mm at this time. \r\nUploaded by Lawrence Lile from Salton inc.
Teardrop PADS and VIAS! Improved support for teardropping of PADS to provide better fill with various pad sizes. Not perfect, but should give fairly usable results now.\r\nUploaded by Bob Starr from RTZ Audio
This ULP lists all devices, packages and libraries separately for board and schematic. It includes also the location in Schematic (coordinates and sheet of each gate)and Layout (coordinates and layer). The output file is tabulator separated and can be imported into spreadsheet software.\r\nUploaded by Richard Hammerl from CadSoft
This ULP can be used for library documentation. All devices will be placed in a schematic automatically.\r\nUploaded by Richard Hammerl from CadSoft Computer GmbH
Minor bug fixed. Finally, an easy way to copy/paste between two instances of eagle (both schematic and board), also for backward compatibility. \r\nUploaded by Maurice SAAB from Lebanon
Draws a nice drill plan legend with a hole, size, tolerance, and number of holes for each size of hole on the board. The spread sheet looking chart is drawn to the right of the board in the .brd file. The total number of holes is also shown. This ULP creates a script named DRAWPLAN.SCR located in your design directory. Credit for the original .ulp goes to Cadsoft. I modified this to fit the standard we use in the USA.\r\nUploaded by Frank Hoffman from LLOYD I/O INC.
Highlights parts with a given value (board or schematic).Hebt Parts mit einem gegebenen Value hervor (Board oder Schematic).\r\nUploaded by René König
This ULP creates all the SMD pads for a rectangular (non-square) QFP. Unzip to the ULP directory.\r\nUploaded by George Blat from BRD Corp