<User>Language Programs</User>

User Language Programs(ULP)

Customize your EAGLE software with community-created programs.

renumber-sch_4_4_0.ulp by admin

Erweitert renumber-sch.ulp so, dass Bauteile pro Seite nummerriert werden (2 Stellen Seite, weitere 2 Stellen sind die Nummer auf der Seite). Weiters kann für eine neue Revision die bestehende Nummerierung beibehalten werden (in diesem Fall werden nur Bauteile beginnend mit 00 nummeriert).\r\nUploaded by Dipl.-Ing. Klaus Schreier from Dipl.-Ing. Klaus Schreier

6291 Downloads | 325 Likes | 11.29.2008

gen-stop-mask-via.zip by admin

Generate an individual Solder Stop Mask for Vias\r\nUploaded by A. Zaffran from CadSoft

6288 Downloads | 339 Likes | 12.08.2005

fill-via4vacuum.ulp by admin

Generate a mask to fill vias for vacuum adapter.\r\nUploaded by A. Zaffran from CadSoft

6281 Downloads | 333 Likes | 12.08.2003

mill2.ulp by admin

Corrected version of mill.ulp: Generates milling shapes which can be edited and output with the CAM Processor. Erzeugt Fraeskonturen, die man editieren und mit dem CAM-Prozessor ausgeben kann.\r\nUploaded by Rudi Hofer from CadSoft

6258 Downloads | 390 Likes | 12.15.1998

mystop4.ulp by admin

This EAGLE User Language Program generates new layers for solder stop mask. This can be edited sepetately. Vias can be left out of solder stop.Das ULP erzeugt neue Layer fuer die Loetstopsymbole. Diese kann seperat geändert werden. Vias können ausgespart werden.\r\nUploaded by Holger Buss from Entwicklung

6240 Downloads | 333 Likes | 11.24.2005

rotate-dev-pac_in_lbr.zip by admin

Rotate a package in Library and generate package veriants.Dreht ein Package in der Bibliothek und erzeugt Packagevarianten im Device.\r\nUploaded by A. Zaffran from CadSoft

6233 Downloads | 370 Likes | 02.20.2002

pcb_profiler_v2.0.zip by admin

Neuere Version (2.0) des Programmes pcb profiler. Mit dem aus Eagle Board Daten für den ColiBus Profiler erstellt werden können.\r\nUploaded by Gerd Vogel from Bavaria

6232 Downloads | 324 Likes | 09.26.2007

xref.zip by admin

Produces a Crossreference that tells you where Layout Parts arelocated in Shematic. Useful with larger Designs.Needs special Frame that is included.\r\nUploaded by Adrianus den Toom from Free developer

6228 Downloads | 525 Likes | 10.24.1997

drillplan-autodim.ulp by admin

Drillplan and auto-dimension combined. One command \\\"prettys up\\\" your board for documentation, counts holes, counts SMT parts and pads, and automatically dimensions your board. Only available in mm at this time. \r\nUploaded by Lawrence Lile from Salton inc.

6205 Downloads | 307 Likes | 10.24.2003

drillplan3_0_mm.ulp by admin

The same as drillplan3_0 but the diameters are in Millimeters [mm] Generates Drill Legends - This version (3.0) adds separate counts for plated holes, and draws table smallest-to-largest to better match drill config files.\r\nUploaded by Richard Hammerl

6202 Downloads | 310 Likes | 11.06.2003