Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Customize your EAGLE software with community-created programs.
This ULP moves the net/bus names so that they do not rest directly on the wire. This helps to better discern an E from an F, for example. This version corrects pathname problem, the error where Eagle sometimes chooses the wire first rather than the text, and now works on busses as well as nets.\r\nUploaded by Kevin Callan
Drillplan and auto-dimension combined. One command \\\"prettys up\\\" your board for documentation, counts holes, counts SMT parts and pads, and automatically dimensions your board. Only available in mm at this time. \r\nUploaded by Lawrence Lile from Salton inc.
This ULP generates a drill tool table (*.drl) and a drill statistics (*.drs). The drill statistics is a table of drill diameters with the associated number of drills and the total number of drills. \r\nUploaded by Sven Petersen from Amotec GmbH
This ULP generates a table of part positions (*.4qd), that can be used for programming SMD placement machines.\r\nUploaded by Sven Petersen from Amotec GmbH
This ULP automates the process of creating surface mount quad flat pack arrays. Unzip to ULP directory.\r\nUploaded by George C Blat from BRD Corp
This ULP creates all the SMD pads for a rectangular (non-square) QFP. Unzip to the ULP directory.\r\nUploaded by George Blat from BRD Corp
The same as drillplan3_0 but the diameters are in Millimeters [mm] Generates Drill Legends - This version (3.0) adds separate counts for plated holes, and draws table smallest-to-largest to better match drill config files.\r\nUploaded by Richard Hammerl
These are a couple of scripts I wrote to facilitate the importing of Orcad schematics into the layout editor. ImportNetlist.ulp imports a PADS2K netlist. ImportBOM (the most useful of both) imports a regular Orcad BOM file and lets you select the package for each group of items. The scripts are not well commented, maybe soon I\"ll work on that.\r\nUploaded by Jean Simonet from - NONE -
Change and swap (copper) layer. Version 4.1\r\nUploaded by A. Zaffran from CadSoft
Generate a mask to fill vias for vacuum adapter.\r\nUploaded by A. Zaffran from CadSoft