Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Learn how to use EAGLE from a variety of example projects.
5V – 3.3V REG BOARD http://tehnikservice.net/projects/5v-3-3v-reg-board/
Signalinverter 8 Kanäle mit ULN2803, max 500mA/Kanal. Benutzt bei Siemens LOGO (Transistorausgang liefert positives Signal) zum Ansteuern von Dual-LED (rot/grün) in Tastern Nikkai UB2-15H2, da diese gemeinsamen Anodenanschluss hatten.
Spannungsregler zum sicheren betrieb von mikrokontroller.
This is an (older) project of a HV-Programmer for Atmel µCs. With this programmer you can reactivate an atmel controller with wrong fuse-bits settings (e.g. reset is fused as a normal port). The original circuit and Software was developed by elm-chan. Unfortunately, you need a parallel port at your PC to work with this programmer. All documents are included, also a description and the used software.
Application from microchip for a fully automatic LiPo single cell charger from the USB port. Imax 500mA Size: 26.6 x 15 mm
This is an add-on board for the raspberry Pi Typ B+. You can mount it directly on the pinheader of the raspberry Pi.
this circuit can be used to interface Thermocouple and micro controller to detect wide range of temperatures.
HCAN Hausautomatisierung http://www.iuse.org/, CAN Hostinterface zur Anbindung des CAN Busses an den PC Lizenz: GPL\r\nUploaded by Martin Haller from privat
Breadboard Power Supply http://tehnikservice.net/projects/breadboard-power-supply/
HCAN Hausautomatisierung http://www.iuse.org/, Bedienfeld mit Display fuer den CAN Bus Lizenz: GPL\r\nUploaded by Martin Haller from privat