Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Learn how to use EAGLE from a variety of example projects.
An Autodesk EAGLE Modular Design Block. This is a time of flight proximity sensor breakout board. Reference: https://www.adafruit.com/product/3316 Modular Design Blocks are only supported in Autodesk EAGLE V.8.0 or higher. Quickly reuse subcircuits that remain synchronized between schematic and PCB. For more information on how to use Design Blocks, please refer to https://www.autodesk.com/products/eagle/blog/whats-new-in-autodesk-eagle-modular-design-blocks/
An Autodesk EAGLE Modular Design Block. This is a small microcontroller development board. Reference: https://www.adafruit.com/product/1501 Modular Design Blocks are only supported in Autodesk EAGLE V.8.0 or higher. Quickly reuse subcircuits that remain synchronized between schematic and PCB. For more information on how to use Design Blocks, please refer to https://www.autodesk.com/products/eagle/blog/whats-new-in-autodesk-eagle-modular-design-blocks/
An Autodesk EAGLE Modular Design Block. Bluetooth low energy sniffer board for analyzing Bluetooth traffic. Reference: https://www.adafruit.com/product/2269 Modular Design Blocks are only supported in Autodesk EAGLE V.8.0 or higher. Quickly reuse subcircuits that remain synchronized between schematic and PCB. For more information on how to use Design Blocks, please refer to https://www.autodesk.com/products/eagle/blog/whats-new-in-autodesk-eagle-modular-design-blocks/
Autodesk EAGLE Design Block The nRF51422 is a powerful, multi-protocol SoC ideally suited for ANT™ and Bluetooth® Smart ultra low-power wireless applications. The nRF51422 is built around a 32-bit ARM® Cortex® M0 CPU with 256kB/128kB flash + 32kB/16kB RAM. The embedded 2.4 GHz transceiver supports both Bluetooth Smart as well as the Nordic Gazell protocol stack which is on air compatible with the nRF24L series products from Nordic Semiconductor.
Autodesk EAGLE Design Blocks Description: The LilyPad Simple just got a whole lot… simpler. We’ve updated the Simple board to create the LilyPad USB by replacing the classic ATMega328 with the new ATMega32U4. Not only does that mean that it’s running a variation of the latest and greatest bootloader, but it also means no more FTDI Basic! The only extra piece of hardware you need to program the LilyPad USB is a micro-USB cable since the new IC has built-in USB support. The LilyPad USB is also officially supported in the Arduino IDE as of version 1.0.2! Just like the LilyPad Simple, this board operates at 3.3V and features a JST socket so you can directly connect a Li-Po battery for power and an on-board power switch so you can turn it off when you’re not feeling particularly blinky. These boards were designed to streamline your next sewable project by keeping things simple and giving you more room to work while eliminating the need to sew a power supply. The LiPo battery is even rechargeable through the board, no more special external LiPo chargers required! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable! Dimensions: 50mm outer diameter Thin 0.8mm PCB
An Autodesk EAGLE Modular Design Block. This is a small microcontroller development board. Reference: https://www.adafruit.com/product/1500 Modular Design Blocks are only supported in Autodesk EAGLE V.8.0 or higher. Quickly reuse subcircuits that remain synchronized between schematic and PCB. For more information on how to use Design Blocks, please refer to https://www.autodesk.com/products/eagle/blog/whats-new-in-autodesk-eagle-modular-design-blocks/
Autodesk EAGLE Design Block The nRF52832 SoC is a powerful, highly flexible ultra-low power multiprotocol SoC ideally suited for Bluetooth® low energy (previously called Bluetooth Smart), ANT and 2.4GHz ultra low-power wireless applications. The nRF52832 SoC is built around a 32-bit ARM® Cortex™-M4F CPU with 512kB + 64kB RAM. The embedded 2.4GHz transceiver supports Bluetooth low energy, ANT and proprietary 2.4 GHz protocol stack. It is on air compatible with the nRF51 Series, nRF24L and nRF24AP Series products from Nordic Semiconductor.
Autodesk EAGLE Design Block The nRF51422 is a powerful, multi-protocol SoC ideally suited for ANT™ and Bluetooth® Smart ultra low-power wireless applications. The nRF51422 is built around a 32-bit ARM® Cortex® M0 CPU with 256kB/128kB flash + 32kB/16kB RAM. The embedded 2.4 GHz transceiver supports both Bluetooth Smart as well as the Nordic Gazell protocol stack which is on air compatible with the nRF24L series products from Nordic Semiconductor.
An Autodesk EAGLE Modular Design Block. This board contains both a li-poly battery charger and a switchmode boost converter for powering your electronics. Reference: https://www.adafruit.com/product/2465 Modular Design Blocks are only supported in Autodesk EAGLE V.8.0 or higher. Quickly reuse subcircuits that remain synchronized between schematic and PCB. For more information on how to use Design Blocks, please refer to https://www.autodesk.com/products/eagle/blog/whats-new-in-autodesk-eagle-modular-design-blocks/
Autodesk EAGLE Design Block Description: This is the latest version of our Venus GPS board; the smallest, most powerful, and most versatile GPS receiver we carry. It’s based on the Venus638FLPx, the successor to the Venus634LPx. The Venus638FLPx outputs standard NMEA-0183 or SkyTraq Binary sentences at a default rate of 9600bps (adjustable to 115200bps), with update rates up to 20Hz! The Venus638FLPx also allows for limited on-chip logging (check out the firmware below), as well as external logging using an SPI flash memory chip (not included). This board includes an SMA connector to attach an external antenna, headers for 3.3V serial data, NAV (lock) indication, Pulse-Per-Second output, and external Flash support. We’ve also provided solder jumpers to easily configure the power consumption, boot memory, and backup supply. This board requires a regulated 3.3V supply to operate; at full power, the board uses up to 90mA, at reduced power it requires up to 60mA. We’ve made it easy to connect an external battery or super capacitor to the board, to support very fast restarts after power is removed. Features: Up to 20Hz update rate -148dBm cold start sensitivity -165dBm tracking sensitivity 29 second cold start TTFF 3.5 second TTFF with AGPS 1 second hot start 2.5m accuracy Multipath detection and suppression Jamming detection and mitigation SBAS (WAAS / EGNOS) support 67mW full power navigation Works directly with active or passive antenna Internal flash for optional 75K point data logging Supports external SPI flash memory data logging Complete receiver in 10mm x 10mm x 1.3mm size Contains LNA, SAW Filter, TCXO, RTC Xtal, LDO Single 2.7-3.3V supply Dimensions: 1.15 x 0.7 inches