Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Learn how to use EAGLE from a variety of example projects.
Preisgünstiges lineares Netzgerät für 12 - 13.8V /2-25A, geringe Verluste, Standard - Bauelemente. Preisgünstig: Bauteile unter EUR10 / USD10 (Q1/2013), plus Kühlkörper, Gehäuse, Transformator. Platinengröße ist fast 1/4 Europakarte = 3.1\" x 2.35\". Benötigt einen Standard Halogentrafo (11.5V), optional NTC/Lüfter-Kombination. Andere Spannungen / Ströme möglich. Siehe Beschreibung. Economic reduced-losses linear power supply 12 - 13.8V / 2 - 25A built with standard components. Low cost: below EUR10 / USD10 (Q1/2013), plus heat sink,housing, and transformer. Board size is about 1/4 eurocard = 3.1\" x 2.35\". Designed to operate with standard halogen lamp transformers, optional thermistor/fan combo. Different output voltages / currents possible. See documentation.
The Arduino Ethernet Shield connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. This means you can learn exactly how it\'s made and use its design as the starting point for your own circuits. Hundreds of thousands of Arduino boards are already fueling people’s creativity all over the world, everyday. Join us now, Arduino is you! -Requires an Arduino board (not included) -Operating voltage 5V (supplied from the Arduino Board) -Ethernet Controller: W5100 with internal 16K buffer -Connection speed: 10/100Mb -Connection with Arduino on SPI port
K8050 - stereo headphone amplifier (ver. 2010.02.20) with AD8610 & TPA6120.\r\nUploaded by Janusz Kostorz
Small, simple module with voltage regulator LM2596, adjustable. ON/OFF function using a jumper possible. Step down converter. Input voltage:4.5-40V Output voltage:1.5-35V(Adjustable) Output current: 2A Switching Frequency: 150KHz
An Arduino Shield with plugs for a BMA180, a BMP085, an SD-Reader, a Logic Level Converter, a Piezo Buzzer, two Led\'s, ports for two servos, and a port for an uMAD.\r\nUploaded by Max Tepermeister
Simple linear power supply adjustable between 0...24V (max. depends on the input voltage). With current limitation (0...2A). Input voltage can be any AC or DC voltage up to 32VDC (max of LM324). PCB is a single layer, only THT component on this board. No smds. Board size: 85x52mm