Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Access the largest collection of free and open source component libraries.
This same library as cirrus-2, but CS4344 in MSOP10 is added\r\nUploaded by Dmitriy Fitisov from Radier Ltd.
This is the edited altera.lbr with the Cyclone III EP340F484 FBGA Package.\r\nUploaded by Dennis O. Akinlosotu from University of Hull
Very low drop voltage regulator with inhibit, package SO-8 \r\nUploaded by Jiri Dadak from student
AD8018 xDSL Line Drive Amplifier, 5V, Rail-to-Rail, High-Output Current, \r\nUploaded by Jiri Dadak from student
This library now includes ONLY ATMEL AVR microcontrollers. It is the result of merging ALL OTHER AVR LIBRARIES available at http://www.cadsoft.de/download as of 3/08 along with my own. In addition to the legacy AT90* devices, it includes most ATMEGA devices including the new 48/88/168, most ATTiny devices and a set of ISP and JTAG pin headers.\r\nUploaded by David Blundell from DB Designs
The Hirose FX10A-120S/12-SV connector numbered as used in the PIC32 Starter Kit.\r\nUploaded by Aubrey McIntosh
PCF8574 package variant SSOP20 corrected connection (Pad 19 20)\r\nUploaded by A. Zaffran from CadSoft
This Library was generated to support the circuit board design during my diploma theses at the Vienna University of Technology, INTHFT in the field of UHF RFID in 2007/08. It contains Amplifiers, Mixers, Filters, Couplers and RF-Transformers, especially from Analog, Maxim, Linear, MA/Com, Coilcraft and Mini-Circuits.\r\nUploaded by Gregor Lasser from TU-Wien
BF959 corrected connection.\r\nUploaded by A. Zaffran from CadSoft