Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Access the largest collection of free and open source component libraries.
This library enables the Coridium ARMmite microcontroller card to be mounted as a daughter card on a larger PCB. All 24 I/O lines and the uC 3.3 V power are made available. The uC may be powered from 5V on the PCB by making a link on the ARMmite board to the power connector. Using 0.1\" pitch header pins and sockets the ARMmite can be made plug in. The ARMmite is a very competent ARM7 32 bit uC, programmable in Visual Basic or C, and supporting Floating Point arithmetic. See http://www.coridiumcorp.com/ for details.
EAGLE dual-connector footprint and signal names for PhyCORE LPC3250 system on module
Tyco MicroMaTch 6-pin vertical female board-mount through-hole connector.
Here is the library for Texas Instruments device TPS544x20 which is Synchronous Buck Converter. It comes with package R-PLQFN-N40 and I\'ve created its footprint from scratch.
Here is library for Allegro device A8519 which is Wide Input Voltage Range High Efficiency Fault Tolerant LED Driver. It comes with 2 packages TSSOP20-LP and QFN28-ET.
Here is the library for Bluetooth Low Energy (BLE), also called Bluetooth Smart module PAN1740. For this device I have built completely from scratch its very complicated footprint based on data sheet info. Feel free to loot at this nice pattern of pads.
The library for ISL8240M which is a fully-encapsulated step-down switching power supply that can deliver up to 100W output power from a small 17mmx17mm PCB footprint. The two 20A outputs may be used independently or combined to deliver a single output of 40A. I\'ve spent the most time for creating so complicated its footprint. Take look to see it then!