Privacy settings | Privacy/Cookies | About our Ads | Legal Notices & Trademarks | Report Noncompliance | Site map | © 2018 Autodesk Inc. All rights reserved
Access the largest collection of free and open source component libraries.
This library enables the Coridium ARMmite microcontroller card to be mounted as a daughter card on a larger PCB. All 24 I/O lines and the uC 3.3 V power are made available. The uC may be powered from 5V on the PCB by making a link on the ARMmite board to the power connector. Using 0.1\" pitch header pins and sockets the ARMmite can be made plug in. The ARMmite is a very competent ARM7 32 bit uC, programmable in Visual Basic or C, and supporting Floating Point arithmetic. See http://www.coridiumcorp.com/ for details.
Here is the library for ZLED7000 which is 40V LED driver with Internal switch (switching mode) with 95% efficiency. I have created footprint for the package SOT89-5 from scratch
Here is the library for Texas Instruments device TPS544x20 which is Synchronous Buck Converter. It comes with package R-PLQFN-N40 and I\'ve created its footprint from scratch.
Tyco MicroMaTch 6-pin vertical female board-mount through-hole connector.
We have developed a Library for EAGLE that contains parts for all of the templates and substrates in our store. Using it is easy, just drop in the template as you would any other part and away you go. https://support.voltera.io/hc/en-us/articles/115004265027
Here is the library for Bluetooth Low Energy (BLE), also called Bluetooth Smart module PAN1740. For this device I have built completely from scratch its very complicated footprint based on data sheet info. Feel free to loot at this nice pattern of pads.
Here is library for Allegro device A8519 which is Wide Input Voltage Range High Efficiency Fault Tolerant LED Driver. It comes with 2 packages TSSOP20-LP and QFN28-ET.